ZJ-1000 Acetoxy Silicone Glass Sealant

ZJ-1000 Acetoxy Silicone Glass Sealant

Hangzhou, China
Hangzhou, China
Company
86-0571-82392772
82393580
Carey Zhu
Contact person

Basic Information

Place of Origin Zhejiang China (Mainland)
Usage Transportation
Brand Name zhijiang
Main Raw Material Silicone
Where to use They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration. They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, powder-coated and non-oily wood. Characteristic 1. One -part, acetoxy room temperature cure, easy to apply. 2. Excellent contact-change ability, no seasonal limited use. 3. Excellent adhesion to most building materials. 4. Outstanding weatherproofing ability, with service life of tens of years. 5. Medium or low modulus, excellent tensile and compression restoring ability. Application 1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry. 2. For better appearance cover outside of joint areas with masking taps before application. 3. Cut nozzle to desired size and extrudes sealant to joint areas. 4. Tool immediately after sealant application and remove masking tape before sealant skins. Limitations 1. Don't use to the joints, which is hidden in earth for long time. 2. Don't use in areas where no moisture has. 3. Don't use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins, etc. 4. The surfaces coated with paint are unsuitable for sealant. 5. The products have poor adhesion to concrete, marble, mirror-glass, Zn-plated materials because of corrosion produced by acetoxy sealant. In this case, please select neutral silicone sealant. Technical Data NoItemThe standardTest result1AppearanceHave no grain, no agglomerations,Pass the the standard2Droop degree mm Uprightness ≤30LevelNo distortionNo distortion3Tack Free Time, h≤30.24Extrusion ability, ml/min≥8017835Tensile modulusMpa23 ≤ 0.4 And ≥ 0.6 0.3-200.56Definite ElongationNo breakNo break7Full cure (25),days7 days8Tooling time,min7min9Tensile strength, MPa≥0.2MPa

Delivery terms and packaging

Unfortunately the seller did not specify the terms of delivery. For more information, contact the seller.
Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product