ZHT-200 Multi-functional Vacuum Oil Disposal

Usageof ZHT-200 oil disposal: Rapidly and effectively remove mechanical impurity and deleterious substances in low viscosity hydraulic oil,lubricating oil, freezing oil and governing system oil. Description of ZHT-200 oil disposal: It is a combination of vacuum drying, coalescent separation and secondary filter. Adopts high polymer compound material; Remove a large number of emulsion and free moisture; Carry on highly pure and accurate purification of oil to enhance its quality; Be able to dispose PLC control program to realize automatic control; Off-Starting time may set up willfully from 1 to 9999hours. Tech. Para. Table `Item Name of para. ZHT-200 Tech. Para. Nominal Flow L/m 200 Working Vacuity Mpa -0.098 -0.06 Working Pressure Mpa ≤0.5 TEMP Range °c ≤80 Working Power V/Hz 380/50 3- phase- 4 -wire Heating Power kW 75 Working Noise dB ≤70 Continuous Working Hours HR ≥150 MTBF HR ≥5000 Manufacture Standard The People's Republic of China Machinery Industry Ministry JB/T 5285-2008 The People’s Republic of China Ministry of Power Industry DL/T 521-2004 Dia of Inlet-Outlet oil pipe mm 50/45 Index of Oil Treatment Gas Content % ≤0.1 (GB/T423) Water Content Mg/L ≤100 (GB/T7600) Impurity % No (GB/T511) Filtration Rating µm ≤10 Advantages of ZHT-200 oil disposal: Divide into automatic and manual control.Automatic foam eliminating installation.Automatic thermostatic control.Automatic liquid-level control.Filtrating online(be able to operate without person).Phase sequence and lack of phase protective function.The trinity protective function.Pollution degree of oil purifier comparator function.Sudden stoppage safety control function.Low energy consume,saving running cost,wide mean time between maintenance.Attached Documents: Instruction manual of oil purifier.Electric appliance schematic of oil purifier.Instruction manual of vacuum pump.Instruction manual of oil pump.Instruction manual of ericomp.