NEPTUS 1800
GENERAL INFORMATION Ed.izm.
1. Category of soils developed on ENIR E2 I - IV
2. Performance in terms of dry soil m3/h 180
3. The pressure of 15-80 m
4. Distance transport of soil, both horizontally 1200 m
5. The maximum depth of the development of the hydro cultivator: m 14
- with additional ejector m 30
6. The minimum depth of development 1.2 m
7. The diameter of the pressure pipeline 325 mm
8. Overall dimensions assembled:
9. The length of the dredge (frame) m 16
10. The width of the dredger m 5.4
11. The total weight of the dredger t 45
12. Sludge in working condition (average) 0.75
13. The height of the dredge from the horizon of water m 4.5
14. Maximum installed power: kW 500-900
15. Length megantoni slotted m 4
Case
1. Engine room: removable
Length m 12
Width 2.4 m
Height m 2.5
2. The control cockpit: removable
Length m 1.5
Width 2.4 m
Height m 2.4
3. The maximum height of the roof above the deck: 3.5 m
Main unit
1. Brand gruntmanis grat/grut/Gras
2. The water capacity m3/h 1800
3. Working pressure on the water m 15-80
4. The diameter of the pipes:
Suction mm 426
Pressure 325 mm
5. Diesel engine: YAMZ, Cummins, Caterpillar, 6CHN, 8ЧН
Power kW (HP) 250-580 (340-788)
The rotational speed rpm 2000
Weight kg 1580
The volume of fuel tanks 8 m3
6. Method fill vacuum gruntmanis
7. Gearbox hydraulic reverse gear
SYSTEM PAPILIONARIA
Winches 4 PCs
Traction t 2
Rope length m 120
The speed of coiling rope on the first layer, m/s 0.3
Rope diameter mm 12
The rope capacity m 120
Power of El.motor kW 12
RAMAPAJAMA DEVICE
1. Lifting boom
Length m 14
The multiplicity of the polyspast. 3
The diameter of the blocks. mm 315
Number of blocks: 3 PCs
2. Ramapajama winch
Traction winch lifting the suction of a slurry pipeline n/m 50
The number of threads of the chain block for lifting powder 6
The rate of rise of baking powder m/s 0.3
Rope diameter 18 mm
Power of El.motor kW 18
AUXILIARY OPERATING MECHANISMS AND DEVICES
Extractor pump
Type To 200-150-250
Performance m3/hour 315
Working pressure m 20
Power kW 30
Rpm rpm 2900
Pump jet hydraulic Ripper
Type D320-50
Productivity m3/h 320
Working pressure m3/h 50
Power kW 75
Rpm rpm 1500
ELECTRICAL EQUIPMENT
Diesel generator set
Prime power kW / kVA 200 / 225
Standby power kW / kVA 220 / 248
Produced the current 3-phase / 400 V / 50 Hz
ADDITIONAL EQUIPMENT AND EQUIPMENT
Heating and air conditioning
Jib crane g/p 1-3T
Piling machine
Milling Ripper, deuteron cutters 0.8 m-1.5 m
Hydraulic system of working equipment insulated or single-loop
Video surveillance system for 5 cameras analog or IP type
Seat / console with the operational management bodies
Control system performance
Emergency monitoring
- with separate devices
United on 1 monitor, industrial computer
GSM remote monitoring system performance
Reinforced hull of marine steel
Anti-corrosion coating
enamel
epoxy-polyurethane
- antiprotease