zed-bull key programmer

zed-bull key programmer Immobilizer reader; transponder clone device Producing Transponders for OBD Programing This machine can be used for professional programmers of the advanced autos, such as can identify the key chips, correct the chi. This machine can be used for professional programmers of the advanced autos, such as can identify the key chips, correct the chip' datas, read the anti-theft code, adjust the LCD odometer and so on. You can read the anti-theft code through the address 17 Instrucment Panel and 01 Engine Control. If the second anti-theft, only through address 25 to read, early anti-theft. The thrid anti-theft can be read by Instrument Panel and Engine Computer. Connect the diagnostic interface OBD of the car, the machine displays the software version is SW V3..6, the left and right arrows in the keyborad can adjust the clarity of the LCD screen. Press OK button to do next. Copy 42 Instruction1.Connect the Zed-crypto to ZED-BULL Mainframe 2.Connect the ZED-BULL and Zed-crypto to each professional power, and turn on the power of ZED-BULL While the screen is displaying as below, doing next. 3.Insert the orginal key chip, and then press the READ button of the Zed-crypto. The screen is with changing (showing reading) 4.The data in reading as the picture 5. Insert the new key chip,press the Write button of the Zed-crypto 6. The screen is with changing as the picture 7. Copy to be finished 100% Dispaly warning information, if you agree,please press F2, or press ESC to back Display List Button 0 Choose the Auto Control Unit Button 1 Key Chip Programmer Button 2 Automative Diagnosis Button 3 Connect Computer and Update System Choose the coorresponding function, press OK button, and do next Choose the corresponding cars models, press OK button to do next Choose 01 engine,press OK button to do next After connecting successfully to the computer of the car, the screen shows the part's number of the Auto Control Unit Choode special function,press OK button to do next Read Pin read anti-theft code, press OK button The anti-theft password is read successfully Secure to access the anti-theft password, press OK button,and enter the password that was read just now The password has been logged successfully Adjust LCD OdmeterPlease choose the 17 Dashboard system, and press OK button Press OK button, communicate with the dashboard of the car,after it is done,choose the special function Read and write kilometer Chip Key ProgrammerPress the 1 button in the keyboard, choose the chip key programmer, then press OK in keyboard Insert the key to Induction zone, press the R in keyboard, reading the data of the key.