XJ250P Well flushing and Workover Rig

XJ250P workover rig is a newly developed workover and well flushing equipment.The rig is fitted with 8*6 self-propelled chassis, engine and hydromechanical transmission. Power is transferred to front & rear axles, drawworks, transfer case and pump on deck.Power takeoffof transmission is connected with a hydraulic pump which provides power for some hydraulic parts on deck. The rig is equipped with a hydraulic rotary table, a power skid with a NTA885-C280 Cummins engine will provide power for the rotary table through a hydraulic pump. It is also equipped with an air compressor and generator set providing power for lighting of engine, drawworks, mast and operating platform. * Well-known diesel engine and transmission. * 69 ft ( 21m ) double mast or 59 ft ( 18m ) single mast. * 6*6 full drive chassis, fast movement and good cross-country capability. * Double drum drawworks,band brake, main drum with Lebus groove. * Mast seat and simple operation platform shipped together with rig. * Provide connecting port for rotary operation. Main Parameters of XJ250P Drilling depth (2-1/2"TBG) ft(m): 11812(3600) Workover depth (2-7/8"DP) ft(m): 8530(2600) Nominal hook load lb(kN): 112400(500) Maximum hook load lb(kN): 168600(750) Wireline diameter/effective line quantity in.(mm): φ0.87/6(φ22/6) Maximum lifting speed ft/s(m/s): 4.92(1.5) Overall dimensions in traveling condition ft(m): 45.28*9.81*12.80(13.8*2.99*3.9) Weight lb(kg): 83775.56(38000)