XF5-181 Cross Connection Cabinet

Model XF5-181 outdoor cable Cross Connection Cabinet (CCC) is to be used in outdoor telephone network plant as a junction point between the primary underground cables and the secondary or distribution cables. The cabinet mainly consists of the housing with the plinth(as one whole body), the racking system (internal fittings),jumper rings,earthing bar and the terminal block (10-pair modules with IDC technology). Features and Benefits u High strengthening cabinet The cabinet is strong enough due to special design. u Proven locking system Special designed locking system provides extra safety and prevent stuff enter into the keyhole. u Corrosive proof Made of SMC or steel material, the cabinet has excellent anti-rust performance and a lifespan longer than 20 years. u Cost-effective Total value when compared to other OSP alternatives for both hardware and installation costs u Modularized panel structure u High density, saving space of main room, good dust-proof performance u Conversion Socket Module is applicable to technical and commercial superior cross connection system and it is designed for universal application. Operation Conditions u Ambient Temperature:-40°C +60°C u Relative humidity:100 % (0°C 35 °C) 75%(>40°C) u Atmosphere pressure:70 kPa 106 kPa Technical Performance u Wire diameter range: - conductor diameter: φ 0.4 φ 0.7 mm - outer diameter: φ 0.7 φ 1.5 mm u Contact resistance: ≤2 mΩ u In no case shall the holdover voltage exceed 135 volts under test 3 conditions. The insulation resistance shall be measured with 100 volts DC and shall not be less than 10,000 MΩ initially. u Reliability: ≥200 times termination u Mechanical Performance of Cabinet The topside of the Cabinet shall withstand at least vertical pressure of 980 N. The flank side of the Cabinet shall withstand at least vertical pressure of 400 N. The hinge of the Cabinet shall withstand at least vertical pressure of 200 N. u Insulation resistance (between contacts and metal work ): >5×104 MΩ/500V(DC) u Dielectric strength (between frame and protection grounding): >3000V (DC) /min, no spark-over and no flashover Applications u Far off extremity of telephone networks