Wood Glue

Water-borne glue assemblyProduct introduction GL - 2515 is a kind of quick dry type of aqueous glue, used in wood, medium density fiberboard, refers to the assembly, flexible veneer and man-made board of paste. Even the 45 º Angle of components, also can achieve high setting the hood strength. This glue with good wet viscosity, flexibility, heat resistance, water resistance, low temperature and freezing-thawing resisting stability of the film. It is applicable for various climates use. Technical parameters Type: aqueous type Appearance: light yellow liquid Viscosity: 10000-16000CPS, Brookfieldsp, 5,20 RPM, 25 ° c PH: 2.5-4 Solid content: 48-51 The lowest temperature: 5 ° film Using methods Cloth glue, brush: manual cloth, etc. Cloth glue quantity: 120-180 grams per square metre. Open time: 20 ° c does not exceed 8 minutes, increase the quantity of cement can make cloth prolonged. Note: do not use with other glue mixture. Adhesive condition and effects Lumber moisture content: 6-14 Wood: ensure that materials processing precision and agglutination surface fresh, no oil, grease and dirt. In the adhesive strength: 7 days after the plywood can reach the highest strength. Heat: has good heat resistance. With good water resistance, water resistance. Health and safety Danger: no The cleaning method: maintain good working practices. If the glue on the skin, can clean water and soap. The tools used in glue dry clean water before available. Product storage Storage: store in sealed container, prevent the original temperature frost. Unused must be sealed containers of glue, prevent dry crust and pollution. Shelf life: six months. "Advanced - first suggestion with" principle. The above information is based on laboratory test results and long-term practice experience, just as the most suitable for the customer to choose to help the product and process. Because each customer service condition beyond our control, and we shall not be liable for any consequences. For every customer, we are suggested for its product testing and regular technical services.