Wireless light remote control switch

BX-RS002 REMOTE CONTROL SWITCH OPERATING INSTRUCTION: INSTALLATIONNon-powered operation. 1. Cut off power supply, please connect the wall switch remote as the showed pictures, access the fire wire and light wire with the wiring terminal which in the cassette and tighten the screws. 2. Press the first button on the left and start the light which access in the OUT1. Press this button again, closed the light. 3. Press the second button and third button take in turn, operation way is as operate first button. Remote control learning Method: Please operation step by step. 1. Press the first button of remote control, make this way of light on, then press this button again(light off )about 3 seconds. When the light from off to on then loosen this button, the light still keep on, you need to choose the remote control and buttons number within 5 seconds, if the light is off, explain learning succeed. Operation proceeds: Press the Wall Switch Remote control Button→Light on→loosen the button→Press the button 3 seconds→Light from off to on→loosen the button→Press the Remote control Button→The light off→Learning succeed 2. The computer chip procedure in the wall switch remote control is designed that could learn different buttons coding which from 4 types remote control. 3. The second and third button learning proceed is as first button. 4. When the setup is succeeds, it can be remote. 5. Delete the learned remote control. Press the any button on the board of wall switch remote control, keep the light on press the button about 8 seconds, the light will from on to off, it could be delete all learned remote control. After deleted, the remote control cant control the switch, if you need to remote control the switch, please learning the remote control as the learning method. Note: When you first use the switch, youd better delete the coding when the products test in the factory. 6. All on and all off functions Technique Data: 1. Operation Voltage: 100-250V AC, 50/60HZ 2. Rated Load: Resistive:600W Inductive: 200W 3. Remote Distance:30-100m 4. Receive Sensitivity: 095db 5. Receive Frequency: 315MHZ/433.92MHZ 6. Standby Current: 50uA 7. Standby Power: 0.016W 8. Application: A variety of lights.