Wireless burglar alarm

GX800-A52 type wireless theftproof alarm system is composed of a wireless remote control theftproof alarm receiving principal machine (four directions LED display) and a passive wireless infrared detector (the detector has alternative GX700-MC1 and GX700-M2 according to your needs). It utilizes high frequency wireless transceiver and data transmission coding and decoding techniques. There is no transmission lead between the detector and principal machine, which making the installation simpler. The wireless guard disposal and withdrawal making the operation easier. Also it provided with alarm output interface (AC 220V), can be connected with bulb or other electrical appliances need to be started during alarming. The product has beautiful appearance and stable performance, is the ideal theftproof device for modern families, shops and enterprises.Technical parameterPower: principal machine: AC220V DC12V ( 8 batteries of No.5) Infrared detecting head: DC6V (4 batteries of No.7) Frequency of receiving and sending: 315MHz Distance of receiving and sending: 200-500M (broadly) Distance of detecting: 7-10M (25°C) 110° Volume of alarming: 100dB Instruction of operation: Alarming principal machine: Installed within the valid range of receiving and sending of room, office, watching office or alarming site, with power connected. Turn the power switch of principal machine to ON position when safe guard is needed (and adjust the volume of alarm according to the needs), the indicating light of power is on and the alarm system enters into watching status. If it receives the signal sent by the detector, it will ring for 30 seconds, and indicates the direction of alarm. Press reset key to cancel the alarm. Infrared detector: installed in the monitored room, the installing height is 1.52.5M, adjust the angle of detector for best angle of view. Input batteries and turn on the power switch, the red indicating light is on, after a delay of 2 minutes, it enters into watching status.