Wind-generator Compensation and Filter Capacitor

Wind-generator Compensation capacitor, compensation capacitor, filter capacitor Wind-generator Compensation and Filter Capacitor Technical Specification 1.Reference standard: IEC 60831-1996, GB/T12747-2004 2.Rated voltage: 690 800VAC 3.Rated capacity: 10 30KVar 4.Dielectric Loss: ≤ 0.2W / KVar 5.Insulation Performance: Withstanding voltage between terminals: 2.15Un/10S Withstanding voltage between terminal and container: 3KV / 60S 6.Max. permissible voltage:1.1Un (Un is rated voltage) 7.Max. permissible current: 1.3In ( In is rated current ) 8.Discharging performance: discharging to 75V or less in 3 Min after the power is disconnected (1 min when specially requested ). 9.Ambient temperature: -25oC +50oC (Max: 50oC ; Max. mean over 24 hours: 40oC,Mean in one year: 30oC) 10.Altitude: ≤ 2000m Characteristics: 1.Special design for compensating reactive power, filtering harmonics and decreasing the line loss in parallel wind generator set. 2.Same level with Europe in product design and manufacturing techniques and reliable in product performance. Their expected service life can be 100000 hours, and that of Heavy Duty type can even be 130, 000 hours. 3.Dry-type capacitor; no leakage, No pollution. 4. The most advanced explosion protection technology in the world. It appears as open circuit when the capacitor is out of operation; 5. Cylindrical aluminum container, and its surface is processed with special technique so that it will not rust and is anti-corrosion; 6. Small size. Its easier to install the capacitor in limited room. NOTE: Products of special specification can be made at the request of customers.