Wi-Fi Signal Booster (Wireless Signal Amplifier) 2

Introduction: The PA24500 2.4GHz Wi-Fi Signal Amplifier is a highly efficient and compact unit designed to increase the performance And range of any wireless device in the 2.4GHz ISM band.Such device include Bluetooth,P2P 802.11b,802.11g and 802.11b+g AP and wireless routers. In certain conditions the Amplifier is able to double the range of the wireless device.The PA24500 Amplifie extends signal range and can eliminate the use of an additional radio with Its associated data line , power outlet signal interference , and setup headaches.The Amplifier is the fast and easy way to extend your signal range in an environment. Perfect For… a. Wireless Hotspot b.Wireless Local Area Network c.Bridge Link Between Networks Feature: a.Works with Access Points & Routers b.Increases Signal Distance c.Increases Throughput d.Quick & Easy Installation Applications : WLAN 802.11b ,802.11b+ WLAN 802.11g ,802.11b+g ISM Band , Bluetooth Specifications: Model NumberPA24500TX & RX Gain> 15 dbmFrequency Band2.4 – 2.5 GHzMAX RX Input Power<-30 dbmSignal TypeDSSSMAX TX Input Power<+15 dbmTR Switch Time< 1u secDiagnosis LEDPWR:GreenWeight≈300 gTX :RedBox Size L * W * H23*14.5*4 CMRX:AmberRF Connector TypeRP-SMA /RP-TNCDC Supply Voltage6 V , 1ATX Output Power1000 mw/+30dbmOperation Temperature< 80°C Quick Install Guide STEP 1 : Disconnect the DC power supply From the wireless device. STEP 2 Connect the assembled Amplifier to The wireless device. STEP 3 Reconnect the DC power to the Wireless device. STEP 4 Connect the Amplifier DC power Supply to the Amplifier. 1.The signal amplifier need to enlarge the signal by the power supply,make sure the router is power-off.Connect the amplifier to the place of antenna,and connect the antenna to the amplifier,then power-on. 2.Pay attention:Do not connect the amplifier to antenna with power-on,it will burn off the amplifier! Package Content: *One Signal Amplifier *One 2.15dbi Antenna *One RP-SAM to RP-TNC Connector *One 6V/1A DC Power Supply