Waterproofing Machinery

Waterproofing Machinery and production equipment... EquipmentModel: FS-120 Configuration: oneWith YP Whole portfolio: 19 Group Auxiliary Function Description MainMotor:Frequency 37kw Aluminumheating coil Electrical control: Special electrical control cabinet Automatic feedingThe number of automatic meter Speculation feeder Conditions of UsePower Requirements:380V/250KVA And Control switch And Cable Have Recycled water Productspecifications: Thick 0.2mm-1.5mm-1.2mm Hydraulic Automatic Changer Equipmentspec ifications: 15m×1.6M×2.5m Light detection Equipment installation Long: 20m broad: 8m High: 5m Safetydevices:Finishing Packaging Have been melted into molten state, the PE(polyethylene) granules are extruded into membrane with the flat and straight extrusion die of the equipment, followed by polypropylene fiber or dacron affixed on the core membrane. With the characteristics of stable performance and excellent durability, the product conforms to national standards of GB18173.1-2006. High automatcity, low power consumption, low cost, high yield, less manual labor.Host adopts advanced trans-mission technology, saving electricity up to 30%. Extruder SJ900 Reducer SJY400 Engine power: 30kw Extruder barrel can be used 38CYMOALA materials with nitriding treatment. Screw heating power is 19kw. Die can be with outer heating system, power is 23kw Three-Roller Device is horizontal style, surface of roller was with hard chrome treatment. Power is 1.1kw Traction Device can be used wear-resistant rubber roller with yorque traction. Power is 10N Meters Model J250-001 Ratio is: 1:1 Winding Unit is with four-roller friction winders. Power is 1.75kw. Reducer: Reliable and durable, low consumption, with a specialof gear surface and superior performance.