universal joint drive shafts and gear coupling sha

Universal joint products with outstanding features and performance, and with a quality level that is second to none in China. Our products offerings consist of universal joint drive shafts, shaft couplingand gear coupling shafts. Our universal joint shafts are broken down into light duty, medium duty, heavy duty, and speciality engineered products. –by Shanghai Maud Group(1). Light Duty shafts range from a flange diameter of 58mm to 225mm and a torque rating range of 180 Nm (133 Ft-Lb)to 22,000 Nm (16,226 Ft-Lb).(2). Medium Duty shafts range from a flange diameter of 160mm to 620mm and a torque rating of 21 kNm (15,489 Lb-Ft) to 1,250 kNm (92.195 Lb-Ft).(3). Heavy Duty Shafts range from a flange diameter of 680mm to 1200mm and a torque rating of 1,600 kNm (118,010 Lb-Ft) to 8,000 kNm (590,050 Lb-Ft) SWC type Cross Universal coupling (with integrated Yoke) 1. Model: SWC100 SWC1400 2. Rotary joint diameter: 100 1400mm 3. SWC100 SWC180 Maximum deflection angle: 25 4. SWC200 SWC640 Maximum deflection angle: 15 5. SWC680 SWC1400 Maximum deflection angle: 10 6. Nominal torque: 2.5 14700 kN.m 7. Fatigue torque: 1.25 8840 kN.m 8. Expansion length: 55 1000mm 9. Weight: 6 2332kgThe classifications of SWC Cross universal couplings, universal shaft, transmission joint are as following: 1. BH: Welded shaft type with length compensation / expansion joint 2. BF: Flange design with length compensation / expansion joint 3. DH: Welded shaft type with short length compensation / expansion joint 4. CH: Welded shaft type with big length compensation / expansion joint 5. WH: Welded shaft type without length compensation / expansion joint 6. WF: Flange design without length compensation / expansion joint 7. WD: Short type without length compensation / expansion joint