Ultra low illumination vandal-proof zoom camera

1. Description * This camera is equipped with the function of high definition, multi-function and super low illumination. It adopts the latest SONY Super HAD II CCD and advanced ISP with 14 bit convertor. The image processing system makes the image vividly and lively. The increasing interpolation processing method makes the image sensor work at its best, which the resolution of color image can be up to 600 TVL. The built-in 3D DNR engine can effectively control the noise, and plus the associated SENSE UP function, the camera can work as long as there is light. * While in the environment of total darkness and the objects are moving fast, the red light needs to be compensated. The built-in movable filter can sense the red light. Plus the external day night mode trigger function connector which can switch the external light, the inner movable filter moves away, and the black white mode will synchronize. * The camera can be controlled by the local OSD menu and RS485 remotely. It’s very convenient in the field construction. This camera can be widely used in transportation, industrial control, buildings etc. * The lens can be adjusted by local buttons or through remote RS485. The camera is equal to an integral camera which has a shortened focus. 2. Features * The latest 1/3’SONY advanced ISP with 14bit convertor * High resolution and ultra low illumination * Built-in 3D DNR function, it can effectively reduce the noise on image display * 256X sense up function can effectively improve the low illumination * Motion detection and privacy masking function. * Shutter speed is adjustable, especially for the moving objects monitoring * Removable ICR can get the good image at day and improve the illumination at night. * The external trigger D/N mode function can synchronize D/N switch and power switch. (This function’s model can be optional.) * Mirror function, digital enlarge and dynamic digital control. * DC12V/AV24V dual power supply * Industry design, with elegant appearance. * 3-axis housing which is easy to be installed and adjust monitor angle. Vandal-proof. * The lens can be adjusted by local buttons or through remote RS485. Product Name Super low illumination vandal-proof auto-zoom dome camera Imaging sensor 1/3 “ SONY Super HAD II CCD 14 bit advanced convertor Pixel PAL:752(H)x 582(V)/NTSC:768(H)x 494(V) Scanning 2:1 Interlace Sync. Mode Internal,Line Lock Horizontal/ Vertical Frequency PAL:15.625 kHz, 50.00 HZ / NTSC :15.734kHZ,59.94HZ Resolution Color:600TVL/650TVL(B/W,Signal Enhancement) Video Output 1.0Vp-p/75Ω Video compound video signal S/N Ratio >50dB Max.( AGC Correct OFF) Illumination 0.00035X /F1.2 (Sense up Mode) Sense up 256 X (Max) Gamma correction 0.45 AGC +26dB Max E-Shutter PAL:1/50 1/120000 s /NTSC:1/60 1/120000s D/N Mode Auto/External trigger, with movable filter Communication RS485, PELCO-D Protocol, 9600bps Lens connector CS interface manual/Auto iris lens Power Supply DC12/AC24 (±10%) Power Consumption 4.5W(Max: the moment at day and night mode switching) Storage Temperature -40°C 60°C Operation Temperature and Humidity -10°C 50°C, 20% 90% RH Dimension Φ142x102mm Weight 900g