UHMWPE Pipe

The characteristic of UHMWPE pipes Anti-abrasion: the abrasion value of UHMWPE pipe is 1/4 of steel pipe, 1/3 of HDPE pipe under same working conditions. Water hammer resistance: UHMWPE pipes have strong enduring capability to the impacts from various sands, mud and slurries. Corrosive resistance: Higher structure stability, corrosion resistant to various chemical mediators. No electrochemical corrosion, no need anti-corrosive coating. Self-lubrication: The roughness of UHMWPE is 0.00022mm. The pressure loss of UHMWPE pipe is 1/10 of steel pipes, 1/7 of nylon pipes. Over 20% of transfer efficiency will be increased. Non-scaling: the internal wall is very smooth, preventing the fouling on the wall and no influence to the production efficiency. Light weight: the density of UHMWPE pipe is only 1/8 of steel pipe. It is easy to move and install, especially suitable for the working sites at where the lifting machines could not work. Easy connection: flanges are available to connect the pipes, no need washers. The installation will be very easy and fast. There are no dangers and concerns of water leakage. Anti-aging: the UHMWPE pipes will not be aging in 50 years under hot sunlight, and it could work over 100 years if buried underground. Environment friendly: UHMWPE pipe is nontoxic, no bacteria, and no pollution to environment.Low carbon: the discharge of carbon dioxide during UHMWPE pipe production is only 15% of steel pipe production, which is good for environment protection.Temperature Resistance: UHMWPE pipes could be used under the temperature of -70°C—80°C, and there is no deformation.Long working life: the working life of UHMWPE pipe is 4 times longer than steel pipe under same working condition. O.D. DN(mm) 0.4MPa 0.6MPa 0.8MPa 1MPa 1.25MPa 1.65MPa 2.0MPa Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm Thickness mm 110 4.7 6.0 7.4 9.2 11.4 125 5.4 6.7 8.3 10.3 12.7 140 6.0 7.7 9.5 11.8 14.6 160 5.2 6.9 8.6 10.7 13.3 16.4 180 5.9 7.7 9.6 11.9 14.7 18.2 219 6.5 8.6 10.8 13.4 16.6 20.5 225 4.9 7.3 9.7 11.9 14.8 18.4 22.7 250 5.5 8.1 10.7 13.4 16.6 20.6 25.4 280 6.2 9.1 12.0 15.0 18.7 23.2 28.6 315 6.9 10.2 13.5 16.9 21.1 26.1 32.2 350 7.8 11.5 15.3 19.1 23.7 29.4 36.3 400 8.8 13.0 17.2 21.5 26.7 33.1 40.9 450 9.8 14.6 19.1 13.9 29.7 36.8 500 11.0 16.2 21.4 26.7 33.2 41.2 560 12.3 18.2 24.1 30.0 37.4 630 13.8 20.5 27.2 33.9 42.1 700 15.3 22.7 30.6 38.1 800 18.0 26.0 38.1 900 20.0 30.0 42.1 1000 22.0 33.0