UF plant

Proposed 3.0 cu.m/hr. UF Skid Plant System for water purification and waste-water Recycling. List of equipments: (1)4040 Stainless Steel Casing Type UF (2)Manifold Racking System . (3)Feed Pump, 1 duty (4)Flushing Pump, 1 duty. (5)3.5HP Air Compressor c/w accessories (6)3m3/hr. Pre-Filter Housing (7)Automatic Valves c/w pneumatic actuator (8)Electrical Control Panel & Wiring Job, Position, Piping Installation (9)UF module valves, PVC Double-union Ball Valve & sampling valves (10)CIP Tank, PE Type 100 liter (11)Wooden crate packaging c/w fumigation treatment for export shipment (12)Assembly, Testing & Commissioning prior despatch from factory (13)Operation & Maintenance Manual Plant description: (1)Operation will be by Cross-Flow.... Feed in 3 m3/hr, Permeation 1.5 m3/hr, Concentrate to be discharged at 1.5m3/hr and circulate back to Aeration Tank. (2)Feed Pumps & Flushing Pumps are automated by Control Panel for normal operation & maintenance operation. (3)Feed Pumps should be suitable for sewage wastewater type. (4)Total 5 modes of operation: Normal Operation, Forward Flushing, Backward Flushing, Air Flushing, CIP Flushing. (5)All the modes above are performed automatically on repeated cycle with adjustable frequency & duration, except CIP Flushing (only needed periodically) (6)Discharge of waste from the UF Skid Plant shall return to the STP to minimize wastage, or to drain if allowed. (7)Maintenance of plant is by filtered water produced by the plant. (8)Air compressor is for actuating of valve as well as for air scouring of membranes. (9)UF Skid Plant c/w flange piping connection for ease of integration to surrounding piping network/ tanks at site. (10)Storage Tank of filtered water to be self-prepared by customer/ others at site.