Two roll Rubber Mixing Mill

TypeXK-150 XK-250 XK-300 XK-360 X(S)K-400 X(S)K-450 X(S)K-560 Working diameter of rolls (mm) 150 250 300 360 400 450 560 Working length of rolls (mm) 320 620 750 900 1000 1200 1530 Working linear speed of front roll(m/min) 8 15.1 15.1 16.25 18.65 24.5 27.7 Max gap (mm) 10 10 10 10 15 15 15 Capacity per.batch(kg) 1-2 10-15 15-20 20-25 18-35 25-50 50-65 Driving motor power(kw) 7.5 18.5 22 30 37 55 95 Overall dimension (mm) L 1080 3400 3580 3940 4250 5200 6120 W 796 1350 1550 1780 1850 2380 2280 H 1415 1500 1695 1740 1870 1770 2000 Weight (kg) 1100 3500 5205 5670 7600 13000 22000 Notes Bearing Nylon bush grease LUB Copper sleeve oil LUB It can mix natural rubber plastic, raw rubber and compound, and rubber sheeting. It is mainly applied in rubber & plastic products factory. It consists of seat, frame, roller, driving gear, lubricating device, cooling and heating device, adjusting device of roller nip, safety brake, motor and reducer, etc. The roller, with smooth surface after polished, is made of chilled cast iron. Steam and cooling water can be inputted in the empty roller to adjust temperature of roller. Two rollers rotate reversely with different speed, so that rubber materials are drawn into the gap of the two rollers for processing. With hydraulic-controlling roll guide, it can freely adjust the axial separation of roll guide. The main machine is of compact structure, high intensity, and low noise and so on. This machine also can be installed stock blender according to customer’s request to decrease the labor work.