Topping quartz Mapetop N AR6 (25 kg)

Topping. Pre-mixed, ready-to-use dry hardening composition for high strength industrial concrete floors, consisting of graded silica aggregate, Portland cement and special additives. Scope. Due to its high mechanical strength and resistance to abrasion, Mapetop N AR6 is particularly suitable to create monolithic industrial concrete floors designed for heavy load usage instructions. Application Mapetop N AR6 must always be spread over the surface of freshly laid concrete mix. The application can be carried out both manually and mechanically. Manually composition should be applied in two layers, and mechanized way, the composition may be applied in a single layer. Application manually. For the first layer, apply Mapetop N AR6 on the surface of fresh concrete mix at a dosage of 1.5 to 2.5 kg/m2. As soon as the Mapetop N AR6 will absorb moisture of the concrete base must be level and smooth out the part with a sanding machine. Immediately after this step, evenly apply a second coat of Mapetop N AR6 over the entire surface. The dosage of the product for this layer must also comply with from 1.5 to 2.5 kg/m2. As soon as the Mapetop N AR6 will absorb moisture of the concrete base, it is also necessary to level and flatten the part using grinding machine. Mechanized application. If using a mechanized application method, Mapetop N AR6 must be spread over the surface of freshly laid concrete mix only one layer, at a rate of 3-5 kg/m2 of product. Consumption When applied by hand: from 1.5 to 2.5 kg/m2 per layer. In process of mechanical application: from 3 to 5 kg/m2.