Thermal Mass Flowmeter

Features: 1.Apply high stability and patented technology platinum RTD sensor 2.Uses proprietary technology "balanced structure package", medium temperature self-compensation. 3.Proprietary algorithms; can achieve high linearity, high repeatability, high precision. 4.Range ratio 1000:1, also can be expanded according to user requirements. 5.Enables measurement of small flow large diameter, minimum flow rate can be measured as low as zero, resolution0.001m/s. 6.No moving parts, vibration can be neglected. 7.Straight pipe less demanding 1-2D. 8.Unrelated with the medium temperature and pressure. 9.Proprietary high-temperature method, medium temperature up to +510 . 10. Humidity algorithm used to achieve high precision measurement. 11. Flow signal enter 12-point dynamic correction, built-in 10-point amendment. 12.Dynamic on-line correction current / voltage output. 13.Dont sensitive to dust and other small particles. 14.On-line continuous flow, easy handling and maintenance. Structural forms:Integrated insert , pipeline Performance: * Measuring range:0 120Nm/s ( 20C,101.33Kpa ) * Accuracy: ± 1% of reading ± 0.5% full scale * Range ratio: usually 100:1 (depending on the calibration of flow range) * Diameter range: 10mm 6000mm * Application scope: suitable for all types of single or mixed gases, containing dust, sand, moisture and various corrosive gases. * Environmental temperature range: -40 +85 (no display); -30 +70 (showing); humidity is less than 90% RH. * Medium temperature range: -40 +100 ; -40 +200 ; -40 +450 ; -40 +510 * Sensor Diameter: 3, 2.5 * Plug-in sensor probe rod diameter: 19 (standard), 16, 12 * Sensor Material: 316 stainless steel, Hastelloy, Titanium * Probe rod material (protection cover): 316 stainless steel (standard), Hastelloy * Medium bi-directional flow measurement * Analog Output: Flow :4-20mADC, temperature :4-20mADC, maximum load: 1000Ω * Accumulated pulse output * Type 12 non-linear correction, built-in 10 non-linear correction * Communication: Serial output RS232/RS485 * Power supply:24VDC/600mA; 220VAC/2W; 110VAC/3W * Alarm: 1-2-way relay output, 5A/220V, 5A/30VDC, type settings * Large-screen LCD Display: 7 instantaneous flow, 8 cumulative flow rate * Process Pressure: 1.6Mpa (maximum 20MPa) * Installation Process Type: Plug-in (card sets, card sets + ball valve, flange connection), pipeline type (flange, screw connection) * Explosion-proof grade: intrinsically safe (ia CT5), explosion-proof type (Exd CT4) * Protection class:IP65