The thermal protector used in air compressor(WP-0

Product Description The thermal protector used inair compressor(WP-01C) We are professional Circuit Breaker, overload protector manufacturer and factory in China. We can produce Circuit Breaker, overload protector according to your requirements. More types of Circuit Breaker, overload protector wanted, please contact us right now!Working Principle: Normally closed contact system, which is operated by a snap action of bimetal disc, is sensitive to current. When properly applied, protector shuts off the motor or the equipment when temperature exceeds maximum safe level due to an overload or stalled (locked rotor) condition. The greater the work current of motor is, the shorter time the cutting off power needs.Using Range: This type Circuit Breaker, overload protector is widely applied to overload protection in Motor, Power Adapter, Combined Outlet, Generator, Battery Charger, Air Compressor etc.Specification: Rating Current: 2A 50A Rating Voltage: AC250V /125V, DC32V; 50 60HZZ Dielectric Strength: 1500Vac/1 min Reset Overload Capacity: 10 times of Rated Current Voltage Drop: Less than 0. 25V Insulation Resistance: >500MΩ Temperature Rise at Terminal Black: Less than 60 at 100% of Rated Current applied continuously at 23±2 Contact Endurance: 125Vac*150% of Rated Current >500 CyclesCalibration: 23 100% of Rated Current: Hold, No-Trip 150% of Rated Current: Trip in an hour 200% of Rated Current: 5 25 Seconds Trip 300% of Rated Current: 1. 5 8 Seconds Trip 400% of Rated Current: 0. 75 5 Seconds Trip 500% of Rated Current: 0. 5 3 Seconds Trip 600% of Rated Current: 0. 4 2 Seconds Trip 800% of Rated Current: 0. 3 1. 5 Seconds Trip