the overhaul vehicle for the bridge's cable

Model Q-DL/30 equipment for cable-stayed bridges automatic maintenance, obtained utility model patents. The patents NO. is ZL97207784.7. Dynamic screen monitor, interval search, continuous video, remote control and manual function can be realized through this equipment.. This product sets a along-cable automatic up-and-down operating system. In the operating system, there is a video system, which can automatically video-supervise the whole process in 360°and sends the video signal to the surface of bridge to supervise in random screen and save into software for interval search. If the manual function need to work or the cable need to be maintain or repair, as the vector, operating system will transport the staff and materials to the point that is defective and need repair to work. The following is this products parameters: ItemsUnitsParametersRated loadkg300Operation speedm/min9.3Diameter of detection for cable(according to you situation)Tilt angle of cabledegree20 -- 80Distance of remote controlm120Effective driveG115(It can work 100 hours)Temperature of applicable environment -20 --- +40Wind speedm/s≤10.8(6 wind)Relative humidity≤90%(25)Electrical powerKW2×2.2Braking torqueN.M2×15Rated upgrading powerKN2×7.85Rated voltageVAC380±5%Weight of maintenance equipmentkg470Weight of the whole machinekg1000The minimum braking rally to tracing wire-ropeKN2×68.5Size of frame(length×width×height)mm2000×1000×1720 Note: this equipment has no standard provision. We will design the product according to your situation. The distance of the remote control, the tilt angle of the cable, the diameter of the cable, applicable environment, and so on, all of above will decide the size of the product you ordered. So, before ordering the product, please communicate with us so that we can provide the most accurate size product to you.