The divider stacker is structurally executed on the basis of the divider "Kuzbass 68-2M" with a vertical auger.
The divider stacker is designed to divide the dough from wheat flour of 1 grade with humidity to 47%, 2 varieties with humidity up to 48%, from rye flour with a moisture content up to 52% in pieces of equal mass and automatic stacking dough pieces into molds cradles restaino-furnaces of various types with capacity of 12...40 MT/day. The divider stacker carries out unfolding dough pieces in one direction, and then return to its original position.
Specifications:
The mass of dough pieces, kg 0,15...0,80
The dividing head with the pistons 110 mm
Division accuracy, % 1,5
The volume of the hopper, L. 330
Stroke up to mm. 2070
The number of drives, PCs 3
The installed capacity of drives, kW., not more than 6.75 to
Weight, kg not more than 400
- Performance is coordinated with the work restaino furnace unit and regulated by adjusting the frequency converters and controller at the factory.
- Control system through a programmed controller. Each actuator is equipped with a frequency Converter.
- Maybe different versions of the hopper (under testoboost or geopolitically).
The advantages of the divider stacker:
1. vertical positioning screw of the camera significantly reduces its length, and therefore:
after work - less dough in the auger chamber;
- reduced mechanical action on the dough.
2. the presence of 3 frequency converters and controller allows you to adjust the divider stacker under any unit
3. the ease and simplicity of design. Weight not more than 400 kg.
4. two motor-reducer simplify the kinematic scheme and increase the reliability of the design;
5. on the inner surface of the hopper caused anti-adhesive coating;
6. the hinged hopper for easy cleaning;
7. moving truck divider stacker is via a pair of screw-nut, which is more reliable than chain and sprockets