Teflon heater

Teflon heater 1.Selecting high-quality stainless steel (sus316 or sus304) tube as heaters core and Teflon (PTFE tube) as outside cover. It could be used in any solution.2. Low surface watt design (1.5w/cm2) to make sure a long lifetime3. Teflon heaters installation location should pay attention to prevent deposition on its surface or solution too tight. Sometimes Teflon tubes (PTFE) burnt out causing cold zone is too short (less than 150mm).4. Teflon heaters volume size is not allowed to be changed into small and small surface area, or it could make the heaters surface power oversize and short the lifetime.6. Teflon (PTFE) tubes got excellent corrosion-resistant, so its widely used in oxidation of three polishing, chemical gold plating, chemical silver plating, chemical nickel plating and varieties of high demand solution7. Teflon heaters could be designed as Vertical- shaped, Spiral-shaped, L-shaped, U-shaped, W-shaped, Coil-shaped, SPD combination-shaped and so on8. All our Teflon heaters are through the CE Certification of EU Market