Tangential Chaser

These Landis tangential chasers are available in various lengths ranging from 1” to 6”depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser. Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended. Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set. Die Head Capacity Chase Section Die Head size 1/4” to 1” Chaser size 3” x 1.3/64 (Set of 4 Pcs)Die Head size 3/8” to 1. 1/2" Chaser size 4” x 1.3/64 (Set of 4 Pcs)Die Head size 1/2” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs)Die Head size 1/2" to 2.1/2” Chaser size 4” x 1.1/4” (Set of 4 Pcs) Die Head size 1” to 4”Die Head size 1” to 2” Chaser size 4” x 1.1/4” (Set of 4 Pcs)Die Head size 2.1/2” to 4” Chaser size 5” x 2.1/4” (Set of 4 Pcs) Die Head size 2.1/2” to 6”Die Head size 2.1/2” to 3” Chaser size 5” x 2.1/4” (Set of 6 Pcs)Die Head size 3 1/2” to 4” Chaser size 5” x 2.1/4” (Set of 6 Pcs)Die Head size 4.1/2” to 6” Chaser size 5” x 2.1/4” (Set of 6 Pcs) Die Head size 4” to 8”Die Head size 4” to 5.1/2” Chaser size 5” x 2.1/4” (Set of 6 Pcs)Die Head size 5.1/2” to 8” Chaser size 5” x 2.1/4” (Set of 6 Pcs)