Supply High quality Spray gun JY-527

MODELDESCRIPTIONNOZZLE SIZECUP SIZEFLUID DELIVERYAIR PRESSUREAIR INLETJY-527LOW PRESSURE1.31000ML180-24031/4″ Supply High quality Spray gunJY-527INTRO 100% manually adjusted nozzle sets ensure the constant high, for complete guns as well as spare nozzle size. *The durable air caps are made of brass(not of aluminum) thus ensuring a long life time. *Suitable for waterborne paints.paint needle and nozzle are made of stainless steel and the spray gun body has been carefully anodized. *with the continuous round/flat spray fan control the spray pattern can be adjusted to any object. The right to use: In order to have a good spray effect, we must first correct operation of spray gun, holding the gun and spray used to keep it vertical and parallel to the movement to pull the trigger action before the beginning and end of the trigger action before the relaxation, so as to control the gun right and paint. Spray gun and spray the surface of the distance should be 150mm-200mm, depending on the pressure and atomization of paint and work needs. Save coating viscosity must always maintain an appropriate and uniform, no sedimentation, each spraying must be attached tightly to get the right line of spray overlap effect. Note: In order to reduce the amount of exhaust and get maximum effect, try to use the lowest spray pressure. Procedure and Viscosity of the spraying: Choosing of the nozzle gun cap of the spray gun: When spraying the surface of the items,special particle is required,according to the paint spraying quantity,the type of large air volume will be chosen,esp.the metal spraying. The nozzle must be chosen according to the viscosity.Generally speaking,if the viscosity is low,the small nozzle will be chosen,otherwise the big one. The Pressure Type,the small nozzle can be used in a large field,from low to high viscosity.