sublimation coating for ceramic/metal/glass/wood

sublimation coating for ceramic/metal/glass/wood

Shenzhen, China
Production capacity:
30000 Liter / Month
Shenzhen, China
Heather Wu
Contact person

Basic Information

sublimation coating for ceramic/metal/glass/wood: The product is the pattern lines clear, penetration, the proliferation of small, high-temperature 1, the characteristics of ink coating The company's products use a single component is a special coating, ink devoted to the late film coating technology. Photo ink technology can be read by any pattern of the coating surface treatment in a variety of exterior surface of the end results. Very suitable ceramics, glass, aluminum, the surface coating of metal and other items. The product is the pattern lines clear, penetration, the proliferation of small, high-temperature not yellowed and many other advantages, higher capital-to ensure color, excellent weatherability, strong adhesion, flexibility, impact resistance, hardness, wear resistance and excellent chemical resistance personality, and the construction is simple and convenient, easily pegged flow, such as foaming from the disease. Produced by coating can be sprayed directly on any resistance to high temperature (200 degrees) materials, lower production costs significantly Long, Jimmy procedures for the production of simple convenience, not passive losers and geographical factors such as materials restrictions and truly personalized ink technology application. Increase the variety of products in a willy - 2, product applications Cup, plate, porcelain, metal plates and other ceramic cup, glass, porcelain plates, and other thermostable products, the need for surface roughness and smoothness. 3Use patterns and usage The products may spraying, coating, crushed James, Brush and other methods of construction. Lean Construction materials : benzene, esters, alcohols, ethers and other rare materials mixed solvents. Viscosity : construction technology requirements may be adjusted by adding an appropriate amount of rare material. If immersed in a beaker 2 coatings generally adding 1.1-1.4 xylene or toluene or 100 copies of 'rare and 0.72% respectively against the use of solvent oil. 1, surface treatment prior to treatment : thorough cleaning. 2, which will deal with special surface moisture primary solution, after completely painted out. 3, which placed 5-8 in the dust counter minutes. 4, curing conditions : (210+10) /10-15min. Attention: Stir well before use to be used Studies on Lid closure will be good. The flammable products of dangerous goods, from pyrotechnics Store in cool dry place kept under seal. 1are advised ventilation kept in a cool, dry, clean room, away from the source of fire, heat and avoid direct sunlight. 2, the storage period of six months, can still be used after passing over inspection 5, harmless products : The company's production of the ink coating international environmental certification, is harmless to human body without side effects.1

Delivery terms and packaging

Packaging Detail: carton box Delivery Detail: in 3 to 5 days after getting payment
Port: shenzhen

Payment term

Telegraphic transfer


Western Union


    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty

    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!


    Рынок B2B
    Cancel Close
      Show more close
        Area search