Stone dry-hanging glue

Features: 1. Made of stone glue dry hanging theory is according to the customer request, carefully developed, it can meet various types of stone dry-hanging construction, can also be applied to other structural strengthening project. Two components: mix according to construction, colloid solidifying velocity rapidly, also have certain operating time. Won't change color, so the stone material used for light its advantage is more apparent. Ii. Use scope: 1 of stone, old metope stickup dry hanging from digging heavy stick renovation. 2. Applicable to stone, wood, steel, aluminum, stainless steel, concrete, cement, glass reinforced plastics, clay bricks, different material toughened man-made stone binding (including the suspension of installation). Method of use: 1 the adhesive will remove oil and impurities, and make the rough handling smooth. 2 take part A and B: fully mixing, etc, the pale color colloid white. 3 will each glue daub glue. Reference dosage: 2cm thick slab (every square metre weighs 50 kg), paste area of not less than 104 square centimeters, paste thickness 0.3 0.5 cm, insurance coefficient over 25 times, 1 kg dry-hanging glue can paste 4 10 square metre, depending on the specific circumstances. Note: 1 adhesive surface should be clean, dry, wet, not without oil, loose, paste should be done as too smooth surface roughness treatment. 2. Stir evenly, otherwise you will be fully and completely, local pollution free of the colloid in stone. 3. Avoid under wet condition and rainy days. 4 every square metre SLATE area of not less than the paste with glue, 104 square centimeters thickness of no less than 3 millimeter. 5. Stone stone is loose or crack in the stone, the stone with a thin layer of strength, stiffness and repair glue waterproof. 7. Construction temperature below 0 ° c, A and B glue can be heated to 20 30 degrees Celsius, stir well again construction.