Steel Tailor G-2 cutting machine

SteelTailor G-2 CNC flame / plasma cutting machine or underwater plasma cutting machine is an effective, energy-saving equipment which is fit for cutting carbon steel, stainless steel & nonferrous metal with all kinds of thickness, and it can enhance usage factor, save time and materials.CNC cutting machine can cut carbon steel with the thickness from 5mm to 300mm in high quality. The CNC plasma cutting machine can cut the thickness of stainless steel, carbon steel and nonferrous metal is from 0.5mm to 150mm in high quality. CNC underwater cutting machine cooperate with the water bed to do the cutting under the water, and it reduce a lot dust, arc-light, harmful gas and noise, all which are made by plasma cutting. Product features: Cross beam: boxed construction, relieving stress, good rigidity, non-deforming, high precision, light of weight, and small inertia. Longitudinal & horizontal driver: movement by exact rack & wheel. The horizontal rail is exact straight rail, and longitudinal rail is made of exact heavy rail, and they are sure the machine running softly, high precision, standing up, neatness and beautiful. Speed reducer is exact speed reduction gear which is made in Germany, and that keeps the precision and balance perfectly when its moving. Longitudinal end frame: there are horizontal guide wheels on the two sides of end frame, and that can adjust the pressure degree that the eccentric wheel at the bottom of the driver frame against the rail, to keep the whole machines balance when it is moving. Choosing the panasonics servomotor and driver technology which are the top product in the world as the drive system, to make the machine softly run, wider range of gearshift & shorter speeding hours. Automatic programming system is simple & easy to use, and that make the CNC programming not so complex any more. Using the Hypertherm or JTdigital as the CNC system, users can choose any of them according their requirement. Specification Body size 4*8m Effecitive cutting area 3200mm* * 6000mm Position precision +/- 0.2mm Weight 2t Power 3000w Cutting precision +/-0.4mm Max cutting width 6500m Max cutting length As custom request Cutting thickness 5-300mm(For flame) Ignite AVC automatic igniting , robotistic / condenser flame THC system or AVC system CNC system Hypertherm or JTdigital CNC programming Fully automatic figure programming software based on AutoCAD File transfer USB interface Cutting gas Oxygen with acetylene or oxygen with propyl Adjusting speed range 0-9m/min Standard machines size 4*8m Cutting area 3200mm*6000mm Optional items: Automatic igniting equipment Robotistic , condenser or arc voltage AVC Third class piercing equipment (thicker than 100mm) Low or high flame transferred equipment Dusting and printing equipment Straight strip torch Marginal crash protection three line torches Gyroscopic groove plasma cutting equipment Plasma power Underwater plasma cutting equipment Length of rail can be lengthened or shortened according to requirement Quantity of torches can be increased or decreased according to requirement