steam autoclave

Our company products still kettles have such characteristics as follows: 1. The still kettles are made in pipelining. Due to automatic jointing, the surface is smooth. The still kettles are made out in large number with advanced structure and reasonable design .The installation terms of still kettles are short, so the investment is low. 2. The structural configuration of still kettle is in barrel cartridge typed steeled design. The end shield of Kettle is made out of an integral 16MnR pressed steel plate. An integral 16MnR steel plate are forged into the body flange and bung flange .The welding line of the pressed parts are all come up to GB150-1998 X-ray NO-DAMAGE-TEST AND HEAT TREATMENT OF STEEL PRODUCTS. 3. The products with complete supporting facilities and controlled by man or by computer. The door of kettles adopts active fast door construction, by handheld speed-down machine or adopts electric, gas, or liquid on-and-off in customer request .The still kettles have perfect security chain protection can relieve of the hidden trouble in operation to make sure the safety in production of operating crew and the safety traffic of still kettle. Two ways of opening. The door of kettles can be chosen through the side or the top. Especially switching on through side adopts flexible rolling underarm serve construction. It is more flexible and convenient with low-order operation. The end of lever connects with the door of kettles and the top of the door of kettles installs counterweight device .So it is convenient to open. Also, the side of still kettle takes little room. 4. Specialized rubber seal ring is used to airproof the kettles doors, so it is easy to install and leakproof, whats more, it has a long operating life. 5. To satisfy different parts, the body bearing of the still kettles sets up three types: fixed, active and top specialized bearing. It can adjust such cases as kettle body expands when heated and contracts when cooled, so that the still kettles can not only work regularly, but also have a long operating life . 6. The still kettles are designed, produced according to national standard GB150-1998 STEELED PRESSURE VESSEL, and inspected by The State Bureau of Quality and Technical Supervision. 7. The still kettles can apply steamed and fostered sand lime bric pipe pile, fly ash brick, air entrained concrete masonry block, high-strength plaster, and other cement product, strong gypsum, rubber item and so on, also besides timber, medicine, chemical industry, glass. 8. The still kettles set up such fittings as safety valve, pressure gauge, measure temperature elements, vent valve, inlet valve, air proof ball valve, drain valve, and other necessary valves and meters. There are oil-release tanks for consumers choosing to use.