Type |
Skin Scrubber |
Certification |
CE |
Place of Origin |
China (Mainland) |
Brand Name |
QZ |
Model Number |
893 |
1,Theory: Remove wrinkle with micro-electricity is an instrument through high frequency to solidify, actuate epidermic cells necrosis ,which can completely remove all kinds of spots such as age pigment , fleck, granulation,tattoo and lentigoin the face and superficial skin in a flash.It has an obvious effect ,unbloody and without scar. 2, Operation 1, disinfect; using the 75%alcohol to disinfect the spot removal needles 2, plug into the power switch ,spot removal pen line ect is inserted into the corresponding socket. 3,turn on the power and adjust the suitable intensity. 4,hold the needle in hand, pointing at the spot ,you can see the melanin is dissolved. 5,afer it , smear antiphlogistin and you can pick at the decrustation. 3, Caution 1,when you finish using ,first turn off the power switch ,then take out the needles to clean,disinfect. 2,when removing spot ,needle top can’t pick deep skin ,and don’t stay for a long time ,otherwise burn dermis. 3,if you can’t remove spot completey once ,you can remove it again after scab fall off, never pick very deep to leave scar or convexoconcave holes 4,don’t remove spot so much ,it is picked about 3-5 particles. in general 5,after removing spot ,you should suggest clients not touch water within 24 hous,and not eat dark coloring matter and ginger. 6,after clean scab ,you should mind clients don’t use hands to tear the scab,let them fall off naturally, in case cause infection,leaving the scar 7,when finishing removing spot ,you should avoid strong sunshine. 8,before removing spot ,you should clean and indisfect the spot socket and needles first. 4, Specification Voltage 220V-240V Frequency 50HZ/60HZ Power 10W Packing Size 38*37*24.5CM