splite pressurized solar water heater

splite pressurized solar water heater

Wuhu, China
Company
86-553-3022303
Yongsheng Zhou
Contact person

Basic Information

Certification CE
Capacity 250
Place of Origin Anhui China (Mainland)
Brand Name Dowell
Model Number DSH-S02
Type Evacuated Tube
Pressure Pressurized
Heating System Batch / ICS (Passive)
Connection Type Split
Housing Material Stainless Steel
solar water heaters effective and powerful solar heating, new type frame, more reliable and stronger The Split pressurized solar water heater is a split system, where the collector is separated from the storage tank. It is flexible assembly, combined with building perfectly. The system consists of storage tank, solar collector and working stations. Two heat exchanger models can be used for houses which have been already equipped with other energy sources (e.g. gas, boiler etc). When the weather is cloudy or raining for a period of time, the water can be heated by upper heat exchanger sourced by other energy. All the storage tanks should be tested as tested pressure of 1.2 MPa (12bar) and the working pressure is 0.6MPa (6 bar). The daily efficiency is over or equal to 55%. WORKING PRINCIPLE: Solar collector gathers energy and heat the medium material in the copper pipe, the medium transfers the heat to the water in pipeline the solar collector. When there is temperature difference ( settled by customers) between the two sensors in collector and tank respectively, intelligence controller activates the circulation pump automatically, and forces the flow of heat medium in the pipeline and do heat exchange with the water inside the tank via copper coil in the storage tank. In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device. Features: 1) Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid heat transfer. 2) The pipeline is made of red copper and conducted by heat transfer medium liquid; the crust uses aluminium alloy mould material of high strength with airflow design 3) Good anti-frozen performance, it can still work under the environment of-30 4) Match with intelligence controller and assistant electrical heater, the system can provide hot water to you anytime. 5) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation Specification: (we can customize according to customers requirement) - Inter tank: SUS 304-2B food grade stainless steel with thickness of 1.0mm-2.0mm - Out tank: stainless steel/galvanized steel/colour steel - Capacity: 80-500L - Evacuated tubes: dia. 58mm*1800mm/850mm with heat pipe/U pipe - Insulation layer thickness: 50 mm - Bracket: galvanized steel with thickness of 1.5mm-1.8mm - Heat preservation: 72 hours - Hail resistance: 25 mm - Working pressure: 0.6 MPa main product line: 100L 150L 200L 300L 500L, also we can produce any type according to customers requiremen

Delivery terms and packaging

Packaging Detail: exportation carton with foam Delivery Detail: within 10 days after advance received
Port: Shanghai/Ningbo

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product