Split pressurized solar water system

Split pressurized solar water system

China
Production capacity:
60000 Set / Month
China
Company
0086-519-86321288
Yoyo You
Contact person

Basic Information

Certification CE
Capacity 500
Place of Origin Jiangsu China (Mainland)
Brand Name Sunlight
Model Number SLB-2
Type Evacuated Tube
Pressure Pressurized
Heating System Thermosyphon (Passive)
Connection Type Split
The solar water heating system is consisted of solar collector, heat preservation water tank, solar power workstation and the pipe. The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heatcollecting. The absorbing percentage of the glass vacuum collector is more than 94%. In the sunny days of spring or autumn, each collecting tube could make the water up to 90 only in 2.5 hours. The water tank uses enamel as internal bladder and polyurethane integral foaming as heat preservation material to improve the heat preservation ability. And it makes the system be used as usual under minus 50 . The high corrosion-resistant and good heat preservation PPR pipe is used as the system's pipe, so it adds the good efficiency and long service of the system. The characteristics: 1 The collector and the water tank are separated, and the system runs under the forced pressure. 2 The controlling device is specialized, so the system runs automatically. 3 The water tank can be installed anywhere. 4 The heat pipe vacuum tube collector is two circuit system, free of freezing and could be used all year. 5 The metal super conducting vacuum heat collector is used, no water in the tube, no bursting and could be used as usual under minus50. 6 The water tank applies the enamel internal bladder, run under pressure. 7 Provide the water at the same temperature, set the highest temperature, heat the water at set point by electricity, protect the data when power off, supply the hot water 24 hours a day. 8 The system is designed separately, in harmony with the structure. 9 The heat collector could be mounted on the balcony, the southern wall, sloping roof or awning. 10 The system is designed as unit, convenient to transport. Specification: 100L,150L,200L,250L,300L,500L. Inner tank:enamel porcelain or SUS304/2B,it depends on your requirement. Outer tank:galvanized steel or colorful steel sheet. Accessories:pump station,controller,vent valve,copper connections.

Delivery terms and packaging

Packaging Detail: Order:export standard cartonSample:wooden box Delivery Detail: Order:15 days;Sample:7 days
Port: Shanghai or Ningbo

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product