Split Case Pump

PROFILE The series product is single-stage double-suction centrifugal pump for transporting clean water and other liquid similar to it in physical or chemical properties . The series products inhalation mouth and exports are under the axis line with the axis line vertical. When you examine and repair the split pump, there is no need to disassemble the inlet, drainage and motor house(or other original motivation). From the flange coupling point of view to the pump, you can install the driving machine on the right side or left sidethrough the necessary(That is, facing the outlet, if the driving machine is on the left side, it rotates clockwise, if the driving machine on the right side, it rotates anticlockwise). The studio of impeller composed with pumps body and pumps cover. There are spiral hole used for installing the vacuum meter and pressure meter on the flange of inlet or outlet. After static checkout, the impeller can be fixed by the sleeve and sleeve nuts on the both side, the direction of the axis can be adjusted by the sleeve nuts, the axial force can be balanced through the symmetric design of impeller. There may be some remaining axial force which will be borne by the end of bearing. The pump bearing is supported by two separate centripetal ball bearings. Double-suction seal ring is used to reduce leakage water at pump impeller. FEATURES The unique design of split case permits easy disassembly. And the inspection is simplified. When it is necessary to change spare parts, it wont affect the alignment center of ht pump and inlet and outlet pipe. The design of double suction ensures high suction lift even at large capacity. High operation efficiency over a wider range of capacities mean while the pump can be operated at both 50Hz and 60 Hz. The pump operates with low noise and stability to keep a comfortable environment. Variable combination of material meets wide application. Drive shaft end of the pump can be setted optionally on the left or right. Shaft sealing can be non-cooled packing seal or non-cooled single acting unbalanced mechanical sealing etc.