split and pressurized solar water heater

split and pressurized solar water heater Model No.: CH-16 Pressurized and split solar water heater 1.Function : Solar collector absorb solar energy, heating the water inside of solar tank. 2.Working pressureofthe Pressurized solar water heater: under 0.6MPA 3.Components of Thesplit and pressuresolar water heater: 1)pressurized solar tank. a.) Inner tank: 304-2B stainless steel, thickness is 1.0mm/1.2mm/1.5mm/2.0mm b.) Outer tank: Colorplate, or stoving varnish technology c.) heating exchanger : Copper coils as heat transfer media 2)Pressurized solar collector: a.) solar Manifold : Copper flow passager + polyurethane foam + Aluminium alloy crust b.)solar Vacuum tube: Threetarget vacuum tube + copper heat pipe c.) solar Frame : Galvanized steel with power coating 3) Solar Accessories: a)Working station's component: circulation pump, intelligent controller with sensors, flux controller,pressure meter, pressure release valve, one-way valve, ball valve,copper pipes, insulation shell,expansion vessel b)Auxiliary electric heating element : 1500W - 2500W,220V-230V/50HZ c)Magnesiumbar : Prevent the scale incrustation d)Check valve: Prevent the water return back e)T/P valve: release the over-pressure ,