Special Dry Strength Agent for Neutral System RB-3

Special Dry Strength Agent for Neutral System RB-301 1 Specification: Appearance thick water solution Solid contents 15±0.5 % pH 3.5-5.0 Viscosity25: 3,000-12,000mPa.s Density25: 1.04 Ionicity amphoteric ion 2 Characteristic: 1) Being amphoteric polyacrylamide with special network structure, it has stable strengthening effect with small amount of and high PH value. 2) It has good strengthening effect in the environment of clear water closed cycle system, especially with high temperature and high conductance. 3) It has remarkable retention for the filler , and can increase the retention rate of the fiber and chemicals. 3 Usage 1) Dilute (usually in 15-30 times) with clean water. (Please do not use the water with a lot of impurity such as white water etc.) Please add into the pulp as evenly dispersed as possible. 2) The add position must be the place where the product and the pulp can mix evenly. Generally it isadded in stork porportioner or proportioning box. 3) The container and piping which we recommend are FRP, PVC, PE, Please not use the container and piping made by iron. Iron containerwill cause corrosion and sticky, do not use it. 4) Do not be used with other chemicals. 5) The storage time is 3 months, the quality of expired products may be declined. Please note that. 6) Being acidic, please flush with running water in case of the skin contact Flush and get medical attention in case of eye contact. Spit it out andget medical attention in case of mis-drinking.