sound light with light control (volt option:DC12V

sound light 1.Save 90% energy more than normal LED 2.no heat accumulation. 3.smart sound control sensor 4.control by sound Basic spec: 1.no other switch is required. It is easily installed and removed. No high heat accumulation, no electromagnetic radiation. The lamp housing is high-level fire-resistant material. 2.The lamp has a photosensitive internal switch that only allows the light to be activated on when the ambient light is low, or dark. At this time this light will turn on automatically if the infrared detector or sound detector detects changes in its patter, such as when someone walks into its area of detection. It will also trigger during loud sounds, such as screaming, applauses, horns within its detection area. The light will stay on for about 45 seconds after the infrared detection ceases or the sound stops.3.This device can be used in Corridors; Wash rooms; Front door; Cloak Rooms, Warehouses, Basements, Garages, Driveways, Security areas, etc.4.MAX power: 3/5Watt (static power: 0.1Watt)5.Luminous flux: 150-280lumen (equal to 25Watt-40Watt conventional incandescent lamp)6.Lighting angle: 30-90 degree7.Infrared sensor angle: 90 degree8.MAX sensitive range: 5 meters9.Sound sensitive level: 65dB10.Average power consumption: 2KWH per year11.Design working life: over 5 years (theoretical life: 10years)12.CE certificate is available.LED sensor light Save 90% energy more than normal LED bulb, no heat accumulation.fit for 24hours*7 working, motion detection ------ Save 90% energy more than normal high power LED bulb, no heat accumulation problem 24hours*7days working designIntroductionMan in light on, man out light off.*Fully integrated motion sensor technology only turns on when activated.*Multi-functional emergency sensor lamp has a Li-ion battery built in which works even during power cuts. *There is no requirement for extra switches as this unit functions autonomously and automatically.*The light is activated by any local infrared changes, including but not limited for Human, Vehicle, or other warm blooded animals.*The sound control lamp is activated by sound.1. The fire-resistant housing is equipped with multiple LEDs, a photosensitive controller, an infrared sensor, and a power converter. The base of the unit can be either E27/26 screw or B22 bayonet. Because the unit is self-switching, no other switch is required. It is easily installed and removed.2. The lamp has a photosensitive internal switch that only allows the light to be turned on when the ambient light is low (≤2 lux), or dark. At this time this light will turn on automatically if the infrared detector detects changes in its patter, such as when someone walks into its area of detection. It will also trigger during loud sounds, such as screaming, applauses, horns within its detection area. The light will stay on for about 45 seconds after the infrared detection ceases or the sound stops.3. Advantages:*Convenience. This lighting device can be installed just like any other light bulb, which doesn't require a switched circuit to operate.* Energy Saving: The annual power consumption is less than 4 kilowatt-hours.* Extremely Long working life, typically in excess of 5 years under normal operating conditions.* Safety: No excessive heat generation or radiation* Bright: high brightness can be equal to that of 30W incandescent lamp4.Applications: This device can be used in Corridors; Wash rooms; Front door; Cloak Rooms, Warehouses, Basements, Garages, Driveways, Security areas, etc. One good example could be a hallway in a home, where it can act like an automated nightlight, or around your home for added security and safety.Fresnel lens + motion / sound controlsensor + photon-sensor + LED + energy-savingbetter, cheaper and more convenient thanCFL + motion sensor / sound controlsensor switch + complicated cable layout