Solar Panel

Features: 1) Double-junction amorphous silicon solar module under standard testcondition 9STC2) Rated power of our amorphous silicon solar module: 32W, 34W, 36W, 38W,40W3) Min. size: 30 x 30 x 3mm 4) Parameters of double-junction amorphous silicon solar module understandard test condition (STC):a) Type 32 (42)H/G: 32±1Pmp (W), 57Voc (V), 1.0Isc (A), 42Vmp (V),643 x 1,253 x 370mm, 12.5kgb) 34(43)H/G: 34±1Pmp (W), 58Voc (V), 1.0Isc (A), 43Vmp (V),643 x 1,253 x 370mm, 12.5kgc) 36(44)H/G: 36±1Pmp (W), 59Voc (V), 1.0Isc (A), 44Vmp (V),643 x 1,253 x 370mm, 12.5kgd) 38(45)H/G: 38±1Pmp (W), 60Voc (V), 1.0Isc (A), 45Vmp (V),643 x 1,253 x 370mm, 12.5kge) 40(46)H/G: 40±1Pmp (W), 61Voc (V), 1.0Isc (A), 46Vmp (V),643 x 1,253 x 370mm, 12.5kg5) Other technical parameters:a) System voltage: 600Vb) Test condition: AM 1.5,100mW/cm², 25oCc) Temperatures: -40 to +55oCd) Temperature coefficient:i) Power: -0.19%/oCii) Voc: -0.28%/oCiii) Isc: +0.09%/oC6) Note: actual output power just after manufacturing is 15% - 20% higherthan the rated power, meanwhile, Vmp and Imp are higher than the rateddata. These factors as well as the maximum power under highest irradiationshould be considered when you design and configure the solar system 7) Basic configuration and special features of double-junction A-SI solarmodule: the module encapsulation includes edge isolation and the othereight procedures, which ensure the active film of the cell is isolated fromoutside. Because EVA films are at the back of the module, sunlight cannotdirectly touch EVA, which makes aging process of the EVA be effectivelypostponed. Furthermore, double-glasses encapsulation prolongs solarmodule's lifetime. In addition, strict MESNE test procedures guarantee theproduct's reliability. It has proved that, obviously, in same power and sameenvironment, A-SI solar module generates more electricity than other kindsof crystalline silicon solar modules 8) Advantages of A-SI module: because of its special spectral characteristic,A-SI module has better conversion efficiency in the low irradiation. In addition,A-SI module has good performance at high temperature, which increasesthe electricity generating ability. In other words, when a consumer purchasesthree kinds of solar modules in the same watts, he will get the most powerfrom the A-SI module