solar LED home-use system

solar system emergency light solar lamp welcome to visit our facrory at any time!! 1. this is our hot new products, it is very popular among young people 2. light and portable, can use withsolar panel and AC power to charge, can separately used only and together with power box. 3. with enough brightness for reading and study, is the ideal present fora studentor an old people. Features1. Can simultaneously connect several LED lights; each LED light has its own ON/OFF switch and the brightness can be adjusted respectively.2. With external USB and DC converter port for mobile phone charging.3. With built-in rechargeable and maintenance-free 6V/4AH (8AH) SLA battery.4. With over-charge and over-discharge protection circuit.5. Continuous lighting time can be as long as 10H (with single LED light/4AH battery)6. With solar panel and power adapter, can be used even if there is no AC power.7. Small size and light weight, portable; easy to install and operate.Specification1. Charged by power adapter Input: 220V/50HZ Output:8.5V/1A Charge time:4AH≥4H; 8AH≥8H2. Charged by solar panel Charge time: 5W/4AH≥8H; 10W/8AH≥8H (With 5W/8.5V or 10W/8.5V solar panel)3. LED lighting time (with single LED light/4AH) High brightness stalls: continuous lighting for more than 10H. Low brightness stalls: continuous lighting for more than 15H.4. Optical properties (3.6V/single light) Brightness: 2.4*103 cd/m2 Luminous Flux: 60 rlx Illuminance: 190 LMUse manual 1. When use LED lights, connect the LED power cord, turn on the main switch of the system and the green indicator will turn on, then turn on the own control switch of the light you want to use. 2. When use the USB for charging mobile phone, first put one end of the USB line into the phone or use or the DC converter port to connect to the phone, and the other into the USB Interface, then open the main switch of the system. 3. When use power adapter for charging, put the DC plug of power adapter into the DC socket of the LED lighting system, then put the other end of the adapter into AC 220V power outlet, and open the main switch, at that time the red indicator(means charging) turns on. 4. When use solar panel for charging, put the solar panel directly opposite to the sun, then put the DC plug of solar panel into the DC socket of the LED lighting system, and open the main switch, the red indicator turns on. 5. If charge finished, green indicator will automatically turn on. If the red indicator turns on and buzzer sounds that means the battery is undervoltage and need to recharge. Meanwhile, the out-connected LED light will stop working and cell phone will stop charging. Guideline 1. Close the main switch as soon as not using it. Recharge promptly when the battery has run down since it may influence the useful life if the battery has no power for a long time. To avoid that, for storage(Whether it has been used or not), it is suggested that recharge the battery for at least 8 hours every 3 months. 2. Avoid rain; do not put it in a place where is hot, humid, vibration and easy to tip over. 3. For cleaning the shell, just use the slightly damp cloth to wipe it when not charging.