Small driving type cold paint road marking machine

1. Engine: Original imported Honda 20Hp air-cooled gasoline engine. 2. Driving system: original imported variable speed transmission system with automatic brake device, which can be freely operated to forward, back off or stop (HTS);The left and right wheels with differential driving device make the curve driving and turning flexible and convenient. The manual brake system makes the running safer. 3. Driving speed: 0-22km/m. 4. Max climbing capability: 20°. 5. Micro-electronic control system: This system has four-type marking ways (also can makes personality design according to the standard of customer). Spray gun controller can freely change the guns between the single and double spray guns. 6. Chassis: Firm welding frame, and surface has been chrome-plated, galvanizated or sprayed coating with corrosion resistance, equip with high speed type imported bearing to ensure the whole machine lighter and more convenient. 7. Rubber wheel: The left, right, front and back wheels are gas-filled pressure resistance vacuum ones, the diameter is 450mm. 8. Guide rod: The guide rod is easy to operate, which can be freely adjusted to up, down, left and right. 9. Illumination and alarming function: Install with high intensity illumination lamp, which makes the work at night convenient. The alarming lamp with adjustable flicker frequency greatly improves the safety of work at night. 10. Paint pump: Equip with single hydraulic piston high pressure airless pump, which makes sure the big flow and stable pressure. Max pressure 20Mpa (Working pressure 10-15Mpa). Max flow: 20L/min. 11. Paint tank: The capacity is 250kg.There is sieve in the tank. 12. Spray gun: Equip with three new type pneumatic spray guns and one hand spray gun with lengthening pipe for spraying special sign like arrow and letter. Hard side columnar reverse wastewater nozzle (30/20) makes the on-spot discharging easy and convenient.The non-arc nozzle ensures the base line collimated. 13. Available paint: for the spraying of cold solvent and water based road marking paint. 14. Spraying width: 100-450mm. 15. Glass beads spraying system: Option for single or double spray guns if construction needs.Displacement of air compressor: 0.6m3/min. 16. Glass beads bin: Bin with windows can check the quantity of the glass beads in time. The capacity is 100kg. 17. It can finish the pre-marking synchronous with marking line, which improve efficiency double times. 18. Size?Weight: 3200mm (length) *1300mm (width)*1500mm (height).650kg. Optional for special transport trailer, which is convenient for transportation. Optional for hand-push machine to apply crossings, parking line and dividing lines.