slurry pump

Slurry pump features and uses M, AH, HH-type pump for the cantilever, double-hull suction horizontal centrifugal slurry pumps. The pump outlet position can be based on demand at 45 degrees intervals, rotating installation of eight different angles. Head in a small area of low flow, high abrasive slurry can be transported; in areas of high lift and large flow of light abrasive slurry delivery. Used in metallurgy, mining, coal, electricity, building materials, transportation and other industrial sectors strong abrasive, high concentration slurry, the type of multi-stage pump can also be used in tandem. M, AH, HH-type pumps have replaceable wear-resistant pump metal liner, impeller wear corrosion resistant metal or rubber. HH-type pump liner and impeller pump using only wear metal. AHR plastic pump for conveying the small particle size, no sharp corners and high concentration of slurry particles, but also can transport corrosive slurry. M, AH, HH model pump seal packing seal can be used, vice impeller seals, packing plus auxiliary impeller seals, mechanical seals and other types. The transmission pattern are: DC Direct drive, CR parallel to the belt drive, ZVZ top and bottom belt drive, CV and other types of vertical belt drive.Technical parametersMODELALLOWABLE MSTING MAX.POWER (kw)CLEAR WATER PERFORMANCEImpellerCURVE NOCAPACITY(Q)HEADH (m)SPEEDn (r/min)MAX Efficiencyη (%)NPSH (m)NO.OF VANESImpeller diameter(m3/h)(L/S)(mm)11/2/1B—AH1512.6-28.83.5-86--681200-3800402-45152WPA151B0111/2/1C—HH3016.2-34.24.5-9.525-921400-2200202-5.55330WPA151E012/11/2B—AH1532.4-729-206--581200-3200453.5-85184WPA2151B013/CD—AH3039.6-86.411-2412-641300-2700554-65214WPA32A013/2D—HH6068.4-136.819-3825-87850-1400473-7.55457WPA32E014/3C—AH3086.4-19824-559-521000-2200714-65245WPA43A014/3D—AH604/3C—AH3097.2-194.427-549-531000-2200553240WPA43A024/3D—AH604/3E—HH120126-25235-7012-97600-1400502-55508WPA43E016/4D-AH60162-36045-10012-56800-1550655-85365WPA64A016/4E-AH120See more technical parameters, and then send the product catalogOrdering: Users in the order (or signed a technology agreement), please specify: 1, Working conditions: flow, lift, slurry concentration and proportion, material diameter, inhaled form of transmission methods 2, Matching motor: Model, the main technical parameters, degree of protection, manufacturers, etc.; 3, Supporting the project: the pump spare parts, special on the tools, speed control devices;