Single-tube quartz heater (metal heating elements)

Single-tube quartz heater (metal heating elements)WATTSVOLTS(See pg.1)HOTZONEIn/(mm)OVERALLLENGTHIn/(mm)MODELNUMBERSHIPWGTLbs/(kg)20002401217QM2217C-**11480(305)(430)QM2417C -**(5.0)20002401223QM2223C-**14480(305)(585)QM2423C-**(6.5)30002401823QM3223C-**14480(460)(585)QM3423C -**(6.5)30002401829QM3229C-**17480(460)(735)QM3429C -**(8.0)35002402129QM3.5229C-**17480(535)(735)QM3.5429C -**(8.0)40002402835QM4235-**20480(710)(890)QM4435C-**(9.0)40002402841QM4241C-**23480(710)(1040)QM4441C -**(10.5)50002403341QM5241C-**23480(840)(1040)QM5441C -**(10.5)50002403347QM5247C-**26480(840)(1195)QM5447C -**(12.0)Single-phase power, who wish to choose three-phase power in the over-temperature protection device model before the "-3", the general material is polyethylene sheath (Polypropylene). In chromic acid or high temperature (180 °C or higher), please use the Teflon (PTFE) sheath to protect the heater.Product Features1.Quartz electric heater is not suitable for use with hydrofluoric acid solution and alkaline solution to heat, For long-term use of such solution is easy to dissolve the surface of quartz tube perforation2,when the aluminum oxide polishing and Liquid with solid deposition are heating, in order to avoid adhesion of the surface of quartz tube, resulting in low-melting-point compounds and corrosion damage to the quartz tube, you need to clean out the solid sediment of acid in the periodic3,Low surface power design(4.5W/CM²), Viscous heating of the solution should use low surface power design(2.5W/CM²),make sure the products’life-span4,All heaters can be selected over-temperature protection switches or Temperature probe to use5,All heaters can be matched Baoda junction box and PE-ray tube6,All heater using international inspection standards to ensure the the security and stability of electrical performance