Single Facer

Note: There is a steel cover outside of the pipes to protect the heat out. Introduction Single Facer is the main machine for producing the corrugated paperboard. External Vacuum model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard. Characteristics: 1. Cover vacuum suction. 2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55 60, which ensures good wear-resistance and long life service. 3. Independent transmission box, transmit by shaft coupling. 4. Glue roll is lifted and lowered pneumatically. 5. Independent glue clean device and electric glue-separate board to control the width of glue. 6. Manually regulate or electrically regulate the display device. 7. Lubricated by high temperature lubricate grease. 8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated. 9. Pressure roll is medium- frequency quenched and chrome-plated. 10. Maximum speed 80m/min, width 1400mm 2000mm. 11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa. Technological Parameters: Working Width 1400mm1600mm1800mm2000mmHeating method Oil heating / Steam heatingDesign speed 80m/minEconomical speed 45-55 m/minCompress-air pressure 0.4-0.9MPaFlute type Standard fluteUV FluteStandard spec.A,B,C,E,FFor other type and model, we can produce as customers requirement.