Silicone gel

Silicone gel for breast prosthesis 1.Basic model: SG1008A/B and SG1009A/B2. Product DescriptionThis product is low viscosity,transparent and middle strength 2-part liquid silicone rubber, suitable for pour molding processes 3.Key Features Easy to be cured High transparent Excellent thermal and cold stability(-50centigrade 200centigrade ). Catalyzed by platinum, non-toxic and no peculiar smell. Shore A hardness is 0°A 4. Applicatioin:Breast prosthesis.5.How to use:Ready-to-use mixturespart A : part B=1:1 are fed directly to pouring molding machine from the original containers by means of a metering end mixing unit called static mixer,at the mould temperature 80-150, The cured time is 8-60 minutes.6. Packaging:SG1008/09A/B are available in 20kgs pails and 200kgs drums.7.Storage: The products should be closed tightly, protected from light and moisture.8.Typical propertiesPropertySG1008SG1009AppearanceA:Colorless liquidB:Flesh pink or colorless liquidA:Colorless liquid B:Light blue or colorless liquidViscosity800-1200mpa.s1000-1200mpa.sUsing RatioA:B=1:1A:B=1:1Pot Life8 hours in room temperature8 hours in room temperatureCone penetration65.070.0Coefficient of cubic expansion0.0960.096Volume resistivityΩ·CM2×10152×1015Dielectric constant50HZ2.72.7Dielectric dissipation factor50HZ0.0020.002 9.Remarks: Prohibit contacting such organics as NPS and the compound containing SnPbAs etc. These figures are for reference only, Please contact us for detail.