Short Cycle Lamination production line

Short Cycle Lamination production line JZ-KW Series of short cycle lamination press (Semi- auto) consist of loading conveyor, hot press, unloading conveyor, lifters in front and rear, Hydraulic station. And it also can consist of the brusher, trimming machine and machine according to customers requirements. It is widely used to laminate decorated board based on MDF/HDF, PB board, especially for furniture board, flooring and door skin. Main features 1. Make use of PLC human-computer interface control, safety and reliably, and the pressure curve control accurately. 2. Hot-press frame with reasonable design is used with, is welded using the carbon dioxide gas from the domestic well-known & good-quality stainless and process the three working-faces on Plano miller. 3. Adopts the secondary recycling control system for controlling the temperature of top and bottom hot plate. Technical date: 1 Finished size:8 301220×2440mm 2 Pressing cycle According to technological request 3 Total power: 48KW 4 Consumption of the heat: 0.24MW (20×104 kcal/h) 5 Specific pressure:12000KNSpecific pressure 35kg/cm2 6. Size of heating platen: 1400x2600mm 7. Daylight opening: 280mm 8. Main cylinder (diameter×stroke):300×280mm 6 units 9. Pressure of hydraulic system: ≤25MPa 10. Temperature of heating platen:≤210 11 Heating medium: Heating oil 12. Lifting time of the press ≤3s 13. Net weight of the equipment: 31000kg 14. Size of the line (Length×Width×Height):7250×5850×4100mm