SANTAN BRAND WELDING ELECTRODE

It is SANTAN brand welding electrode which are salable in West African countries, welcome to contact us if interested. We supply all kinds of welding rods, welding electrodes, like mild steel welding rods, low hydrogen welding rods, stainless steel welding rods, aluminum welding rods, cast iron welding rods... 6013 welding rod is a light to medium penetrating all-purpose mild steel welding electrode for use in all positions, on carbon steel. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Good for general, all-purpose applications and joints with poor fit-up. Also 6013 welding rod has a high titanic coated type. This electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. As a result, 6013 is an all purpose electrode that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance. 6013 electrodes may be used in any position with AC or DC (straight or reverse polarity).APPROVALS: Meets AWS A5.1 Class E6013.APPLICATIONS: 6013 electrode is commonly used for automobile bodies, truck frames and bodies, ornamental iron, metal furniture, farm implementations, machinery guards, storage tanks, or wherever appearance is important or desirable.1) Suitable for all position welding of steel sheets and irregular joints even under unfavorable conditions. 2) Excellent welding technological performances. 3) The arc is stable and the spatter loss is negligible. 4) The slag is fluid and when hardened it is compact and easy to remove. 5) Better for welding structures of steel sheets. Vehicles, buildings, machinery-manufacture, vessels and various structures of low carbon steel. Chemical composition of deposited metal:(%) C≤0.08, Mn≈0.4, Si≤0.20, P≤0.030, S≤0.02, Cr - Ni - Mo - V - Mechanical properties of deposited metal: tensile Strength (MPa)Yield Strength (MPa)Elongation (%)charpy V impact J ( at 0°C)≥500≥420≥26≥47 Current reference: Diameter of Electrode (mm)Ø2.5Ø3.2Ø4.0Ø5.0Length of Electrode (mm)300350400450Current (A)60-10080-150150-190180-250