Robotic mower

Product Introduction Automatic grass cutter is composed of four parts, the mower, charging base, perimeter cord and the remote control. It cuts grass without the need of human assistance and is suitable for both outdoor lawns and courtyards. The mower uses a preprogrammed cutting route, it doesn't need oil or gasoline, you dont need to collect and remove the clippings and save up irrigation and fertilizing costs. The robotic lawn mower is highly efficient, cost effective, environmental friendly and safe. Product Features: Automatically detects the density of the lawn with its controlled cutting process and intelligently chooses the cutting mode according to the lawns density. The machine intelligently adjusts its moving speed in effect this allows the robot to move at a pace that is suitable for the density of the lawn, this ensures the life time of the electric motor and batteries, further more, grass cutting efficiency is increased and the life time of the machines electrical circuits is greatly extended. It's easy to adjust the grass mower height. There is a big drum on the top of the machine and the twist structure design makes it easy to adjust the desired grass height. Reliable obstacle collision prevention function. Built-in sensors allow it to automatically avoid obstacles. When meeting obstacles, it will automatically cross the obstacle or slightly touch the obstacle then cross it, this function reduces collisions between the machine and obstacles. Safety features stop the machine if its working under unsafe condition. New design structure stops the blade from causing injury to peoples feet when its working. If the machine is lifted when its working and the lift angle reaches its safety limit, the machines motor will stop working within a fraction of a second, this stops the machine from injuring people. Prevention of the machine from escaping through cutting off the wiring fence or the charge base supply. The machine will stop immediately when the charge base or the wiring fence is cut off. Manifest power supply cut-off indication No matter what methods are used to power off (remote or automatic) the machine, the motor will stop working within 1 second to prevent the possibility of injury to people. The large power off red switch will stop the machine in an emergency situation. Drives away nearby animals with sonar Built with sonar, it drives away nearby animals, so it stops the machine from injuring them. Identification of its own particular frequency It needs wireless to start the mower and the frequency of the wireless is one-one corresponding to when it was manufactured, so it will work without a remote or a charge base. And the one-one corresponding frequency prevents disturbance from similar frequencies of similar products and one user has only one frequency. Description Data Machine walk speed: 24M per minute Speed of cutting motor: Less than 4000rpm Machines ability work area: 3300 square meters Suggested work area: Less than 600 square meters Machine voltage: 24 V Average electric current: 3 Amp Charge base output current: 2 Amp Charge base input voltage: Alternating current 110-230 V Charge base output voltage: Direct voltage 30 V Mower grass width: 22-24cm Mower grass height: 37cm Operating noise: Less than 70Db Product weight: 11.3Kg Charge base weight: 1 Kg Charge base external size(L*W*H): 35*54.5*28cm Product external size(L*W*H): 65.6*51*26cm