RFID Smart Card Reader SRF-233A

RFID smart card reader 1) RFID EM card reader introduction: 233A proximitysmart cardreader utilizes EM Technology to read contactless EM cards Suitable for accessControl, time andattendance and Other card control systems Wiegand output model interfaces With all existing Wiegand Protocol access control systems 2) MF reader introduction: 233C Mifare smart card reader utilizes MIFARE technology to read Mifare Contactless smart card. Contactless smart cards are used For stored value or data Applications such as access Control, vending, toll roads, Airline ticketing, banking cards, City cards, ID cards, university Cards, phone cards, park and Ride, and prepaid metering Specifications:1)Power requirements: 233A EM: 9-12VDC at 100mA, 233C MF: 7-12VDC at 100mA 2) Linear regulator is recommended Read range: 233A EM: Safety read range for 7cm With standard H4100 card 233C MF: Safety read range for 4cm with Philips Mifare 1 3)Contactless smart cardFrequency:233A EM: 125kHz standard 233CMF: 13. 56kHz standard 4) Operating temperature: -22 to 150 degrees Fahrenheit (-30 to 65 degrees Celsius) 5) Operating humidity: 0% to 95% Relative humidity non-condensing 6) Audio/visual indication: Green, Red, yellow LED bar and buzzer 6) Response time: Less than 0. 1 Second 8) ISO standard:233CMF: ISO14443 type A Compatible 9) Cable distance:Wiegand interface: (100m)RS232 interface: (15m) 10)Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum Stranded with overall shield or Equivalent Additional conductors may be Required for LED or beeper Control