resilient seated gate valve

resilient seated gate valve

China
Company
86-0512-66308028
victor chen
Contact person

Basic Information

Place of Origin Jiangsu China (Mainland)
Model Number 300Z49X-Q
Brand Name suzhou yueda valve co.
Standard or Nonstandard Standard
Structure Gate
Pressure Low Pressure
Power Manual
Material Casting
Temperature of Media Low Temperature
Media Water
PN100 resilient seated Gate valve Flat base: A basin-wide and straight-through design without the concave cavity , no flowing stagnation is applied at the bottom of the soft sealing gate valve in the company so as to guatantee the smooth of the fluid body without secondarily polluting the media. . Full-coated flashboard The flashboard uses Ductile Iron QT500-7 skeletion overally coated by rubber of high performance. The mature technology and advanced workmanship of vulcanization completely isolates the iron core from the fluid body. . The coating is tight and reliable and the bonding strength complys with the standard of DVGW. Even if suffering of frequently extruding pressure, the rubber will not drop off. The structure of two-body type between the stem and the flashboard insures enough degrees of freedom. There is great flexibility of unlocking and closing without any obstruction. . Reliable upper seal: The upper seal between the stem and top employs in total five O-Ring structure with there outside and two inside. Compared with traditional valves of stuffing-sealed structure, the sealing is tighter and more dependable and the fricational resistance diminishes in a larger scale. . Anti-corrosion: The body is electrostaticly coated on both internal and external surfaces by epoxy resin powder. The coating is even and firm, allowing no exposure of any iron. The middle cavity connects with the rubber sealing on top of the bolt so that the bolt is isolated from the outside world so as to prevent eroding. . Sanitary quality of food class: The inner cavity of the gate valve is coated by non-toxic epoxy resin powder complying with DVGW standard and far higher than the GB/T17219 standard. The inner components such as the stem and its nut use stainless steel or bronze, which are free from water-corrision. The coated resin is in accordance with standards of drinking water. . Applying areas: The gate valve can be applied to potable water systems, industries of foodstuff and medicine, industrial water supply and drainage and dispose of sewage as well as natural gas and gas and so on.

Delivery terms and packaging

Packaging Detail: plywood case Delivery Detail: depends on quantity
Port: shanghai

Payment term

Documents Against Payment

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product