Remote Water Meter

Remote Water Meter Feature: 1.Has built-in data acquisition, processing and memory cell 2.Its measurement characteristics and mechanical properties meet with the requirements of stipulated by ISO4064 on Class B water meter standard 3.The decoder completes decoding and sending data instantaneously without any bias between the output and the reading of the meter, which is exempted from impacts of jitter, backflow and magnetic interference. 4.Remote transmit consumption information and other information through the bus line. 5.Be compatible with RS485 bus transmission, both independent working and networking are available 6.Intelligent electronic cell is completely sealed in the counter which is separated from water and moisture outside. 7.“Zero” power consumption, with low failure rate and longer service life Main technical data: ModelDN(mm)ClassQmaxQnQtQminm3/hLXSDY-15Z115B31.50.120.03LXSDY-20Z120B52.50.200.05LXSDY-25Z125B73.50.280.07 Dimension and weight: ModelDNLL1BHCoupling threadWeightWire lengthmmdDKgmmLXSDY-15Z11525816585123R1/2BG3/4B1.6800LXSDY-20Z12029919585123R3/4BG1B2.1800LXSDY-25Z12534522585125R1BG11/4B2.6800 Working Conditions: Water temperature: 0°C 50°C Water pressure : ≤1.0MPa Operating Humidity: 0 97%RH Pressure loss: ≤0.1MPa Maximum Permissible Error: a. The maximum permissible error between and including the minimal flow rate (Qmin) and excluding the lower section of the transitional flow rate (Qt) is ±5%; b. The maximum permissible error between and including the transitional flow rate (Qt) and including the higher section of the maximum flow rate (Qmax) is ±2%. Available in hot water.The main technical data refer to cold potable water meter. The main technical data refer to cold potable water meter. Working Conditions: Water temperature: 30°C 90°C Water pressure : ≤1.0MPa Operating Humidity: 0 97%RH Pressure loss: ≤0.1MPa