Remote Toy Airplane PCBA

Remote toy airplane PCBA 1.Description: 2.4G Battle Toy Airplane PCBA cost low and with the high performance. It controls airplane stability automatically and smoothly, thus the airplane will not wobble and whirl.2.4G adopts the Infrared control mode , the straight line launch indoor is longer than 15m, and it is longer than 8m when in 450degree. Advanced 3IDs function makes it is funny when playing, allow 3 players play in the same frequency. This article takes the technology of most-short encoding and special checkout decoding, assure decode more glibly and separately. 2.4G controls a 3ch motor, two main motors can work at the maximum level rate: 63, and one tail motor which can workat the level rate: 7 in both forward and backward. It can adjust for customers request because this construction has few differences when duty cycle is different.2.4G has the function of battle with players, and the battle distance will be 3 5m. The airplane will horizontal rotate for 1s if it was hit for once and twice, and drop down slowly when it was hit for the third time. Airplane can restart after the throttle becomes zeroing.Potentiometer adopts technology of automatically identify Zeroing,largely improves its performance and solves the problems of motor racing and non-return-to-zero.2. Application: 3ch IR Battle Toy Airplane;3. Features:1)3ch motor control(Two main motors in the front, and one horizontal stabilizer behind);2)3ID with the same frequency(3 players play together);3)TX can change the ID No. at random (A, B, C), RX doesnt need to set up ID No., and it will identify code automatically when the power is on;4)Transmission frequency38Khz;5)Charging method: TX : 6 pcs AA batteries RX : 3.7V/100 350mAH Lithium battery;6)TX has the function of charging up by itself, the maximum current is 350mA;7)Charging mode: constant current then constant pressure;8)Potentiometer show at Zero automatically;9)Have the function of battle(with gun sound effect);10)Motor protection.